Skip to content

ONSITE IT GUIDE

Wireless Site Surveys: Types, Deliverables and Cost Drivers

A wireless site survey should answer a defined question about the space and the network. Early planning may need a predictive model. An existing network may need onsite measurements. A completed installation may need validation against its requirements. Those are different purposes, and the right assignment depends on the decision your team needs to make.

Before comparing proposals, ask what will be modeled or measured, which areas and devices matter, and what the report will let your team decide. A heatmap alone does not answer all of those questions.

Match the method to the question

Project question Work that may help What the result establishes
Where might APs be needed before the site is ready? Predictive design using a model of the space A prediction based on the model and its assumptions
What wireless conditions are present in the accessible areas? Onsite measurements, including passive survey methods where appropriate Observations collected using the selected method and settings
How does a connected test device behave across the area? Active measurements with a defined connection and test plan Results for the test device, network and conditions assessed
Does the installed network meet the project's requirements? Post-installation validation using suitable measurements and checks Evidence against the agreed criteria within the assessed scope
Where are APs and what physical conditions affect installation? Visual discovery or site-readiness assessment Physical records, rather than an RF performance result

Post-installation validation describes the purpose and timing of the work. Passive and active describe measurement approaches that may be used within it. Treating all of these as interchangeable “survey types” can obscure what a proposal includes.

Understand predictive design

Predictive design uses a representation of the building and proposed wireless equipment. The designer works from floor plans, construction information, intended device use and requirements to evaluate a possible deployment. NetAlly's planning documentation distinguishes predictive modeling from measuring the installed network.

A prediction can support early equipment and cabling decisions, especially before the finished site is accessible. It remains dependent on the inputs. Identify assumed materials, uncertain layout details and changes that should trigger review. The wireless designer should decide what onsite information or subsequent validation is needed.

Understand passive and active measurements

In a passive survey, the tool observes wireless transmissions without associating its survey connection to the target network. In a connected active survey, it joins a specified network to collect connection-related information. The actual measurements depend on the tool and selected test plan; the label alone does not establish a complete performance test.

For example, NetAlly's AirMapper user guide describes the different connection requirements for its passive and connected active modes. That is a tool-specific implementation of the distinction, not a promise that every survey product records the same data.

Ask what devices or instruments will be used, what the measurements are intended to show and how the results relate to the devices your staff use. A successful test-device connection does not establish every application's performance on every client device.

Agree on the deliverables before the visit

A useful report explains the work as well as displaying the result. Ask for the survey purpose, floor-plan version, areas assessed, method, relevant equipment or test conditions and the requirements used to interpret findings.

Discuss which maps, records, findings and underlying project files are needed for the next stage. Identify the format your wireless team can use and whether analysis, a design recommendation or a follow-up validation is included. These outputs should be agreed for the assignment rather than assumed to accompany every survey.

Also ask how the report will show inaccessible areas and incomplete measurements. An unmeasured room should not silently appear to have passed.

Example wireless survey deliverable manifest

Use a manifest to reconcile the assignment with the files delivered. Agree the entries for your project; this is not a promise that every survey includes each output.

  • Scope and method: the question, floor-plan revision, areas assessed, inaccessible areas and selected measurement approach.
  • Results: the agreed maps, observations and test conditions, with exceptions clearly identified.
  • Working files: native project or measurement files where included, with the required software or access arrangement identified.
  • Next decision: who reviews the findings and whether design, configuration, installation or later validation is included.
  • Delivery check: the intended reviewer has received the correct files and can open them through the approved sharing method.

Photographs and measurements collected for a quote can support the next proposal without establishing a finished wireless design or a repaired network. State which stage the report supports. Record missing files or a restricted sharing link as an open action in the completion record.

Clarify whether the question concerns Wi-Fi or cellular service

A request for a 'wireless survey' may concern indoor Wi-Fi or a proposed cellular installation at a rooftop position. State the service, approved measurement locations and information required for the decision. If installation readiness is also needed, scope the access arrangement and cable path separately. A Wi-Fi heatmap should not be assumed to answer a different radio or physical-installation question.

What changes the cost?

The area of the building is one input. Access windows, floors, restricted spaces, physical layout, measurement density appropriate to the task, travel and required reporting can also affect the work. A survey that includes specialist analysis or repeat visits has a different scope from collecting a defined set of observations.

Compare proposals using the same purpose, areas, method and outputs. Identify whether the price includes preparation, data collection, analysis, report review and any follow-up visit. Otherwise a lower quote may cover a different piece of the project.

Do not pay for every available method by default. A focused assignment may be enough to resolve a specific uncertainty. Equally, a basic visual visit is not a substitute where the network decision needs RF measurements.

Plan what happens after the report

The wireless owner should decide whether findings call for more information, a design change, configuration work or physical installation. Agree who will validate any subsequent change and under what conditions.

For new builds, the construction-stage wireless survey guide explains how timing affects what can be established. For an existing report, use the guide to reading survey results.

ALL I.T. coordinates and carries out agreed site-survey assignments with the method, resources and output defined for the work. Share the question your network team needs answered before selecting the visit.

Planning work that needs onsite help?

Tell us the task, locations and timing when you are ready to discuss the field assignment.